|
CPFM 8800 Coriolis Mass Flow Meter
The CPFM 8800 Series is a family of advanced flow meters based on the Coriolis principle. Fabricated exclusively from PFA (Perfluoroalkoxy) polymeric material, the CPFM is ideal for high purity applications. It is the first commercially available all PFA mass flow meter in the world.
|
|
FLOMID FX Electromagnetic Flow Meter
FLOMID FX series is an advanced magnetic flow meter that is suitable for measuring conductive liquids with great accuracy and repeatability. Because of no moving parts or obstruction in the meter body the flow meter offers very low pressure drop and high durability. It comes in compact (integral) as well as remote (separated) mounted versions.
|
|
FLOMAT Electromagnetic Flow Meter
FLOMAT series flow meter is suitable for use in large diameter pipes or open channels as an economical solution for liquid metering. Applications include flow measurement of conductive liquids in water treatment, sewage treatment, acid and alkaline solutions in chemical and pharmaceutical industries. The body is constructed in SS 316 and on request available in PVDF wetted parts with electrodes in Hastelloy C, Zirconium, Titanium.
|
|
KFM 2100 Kinetic Flow Meter
KFM 2100 Series is an advanced flow element that is suitable for liquid, gas and steam flow measurement with high accuracy and repeatability. This is due to the patented design that uses a stream-lined bullet shaped flow element that causes minimum disruption to the flowing medium with low pressure drop but providing unmatched turndown.
|
|
Covol Oscillating Piston Flow Meter
Covol volumetric counter is ideal meter for viscous fluids such as oils, waxes and polymers. The sensor is constructed in SS-316, PVC, PP and PTFE material options to suit corrosive applications. It can be easily cleaned and sterilized.
|
|
Mini-Wheel Flow Meter with In-line Flow
Tangential turbine flow meters continue to be the most common way to measure flow electronically in a wide range of industries. Enhancements to tangential turbine flow meter systems are producing a flow-sensing device that is smaller, easier to install, and more accurate than ever before. Malema manufactures a line of Tangential Turbine (also called Paddle Wheel) Flow meters that utilize sophisticated circuitry to foster signal conditioning.
|
 |
Low Flow Paddlewheel Flow Meter
• Very low flow sensitivity
• State-of-the-art electronics -- high reliability
• 4-20 mA, 0-10 VDC, or pulse output
• Adjustable flow switch -- built in
• Small foot print
• For liquids only
• Repeatability ± 0.5%
|
 |
M-10000 Paddlewheel Flow Meter
Paddle Wheel flow meters have an outstanding accuracy and wide flow range capability. These are tangential turbine type and with state of art electronics have very high reliability. These have a built in adjustable flow switch which can be used to modify supply lines based on specific applications. Ideal for fuel cell and other microflow applications, these are made with different materials based on use of customer.
|
 |
SC250 & SM250
Metal Tube Variable Area Flow Meter
Malema's SC250 & SM250 model metal tube variable area flow meters are suitable for gases, liquids and steam flow measurement. It uses a robust metal tube construction with an optional plastic liner to handle tough and corrosive process fluids.
|
 |
6001 / 6002
Glass Tube Variable Area Flow Meter
Malema's 6001/6002 series glass tube rotameters are designed according to VDI/VDE 3513 standards. Its clear borosilicate tapered glass tube with scales help flow reading with great accuracy and ease. End connection options such as screwed end connections, flanges and sanitary couplings make it suitable for all kind of process industries.
|
 |
Series 2000
Variable Area Purge Meter
Malema's 2000 series variable area purge meters use a tapered borosilicate glass tube with a fine threaded regulating valve for precise flow adjustment. Various flow tube lengths such as 100 mm, 150 mm and 300 mm are available. It's compact construction with reduced dimensions facilitates easy installation and mounting on control panels.
|
 |
DP65 / DP500
Target Flow Meters
DP65 and DP500 series target flow meters are suitable for liquid and gas flow measurement. Its design and robust construction makes it suitable for tough applications including the liquids containing solid particles.
|
 |
MTF-4000
Thermal Mass Flow Meters
The MTF-4000 series is designed for a wide array of applications including those for the semiconductor and bio-medical industries. Low cost and high performance are achieved by using the latest circuit designs, sensors and microprocessor technology. The MTF-4000 has many output functions including an RS-485 interface, LED display, Hi/Low alarm, open collectors and 0 - 5 VDC output. Based on these output functions, it is very easy to configure and operate an accurate flow measurement system.
|
 |
MTHF Series
Thermal Mass Flow Meters
The MTHF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTHF Series measures the mass flow rate of gases in 18 ranges from 0-10 NLPM to 0-50 NLPM as range table. The MTHF Series combine a mass flow transducers with an electromagnetic proportional valve. Valves are not recommended as shut of valves. Controllers us a 0-5 V DC liner set-point signal supplied from the local set-point point or from a remote source.
|
 |
MTMF Series
Thermal Mass Flow Meters
The MTMF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTMF Series measures the mass flow rate of gases in 3 ranges from 0-100 NmLPM to 0-200 NmLPM as range table.
|
 |
MTLFC Series
Thermal Mass Flow Meters
The MTLFC Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTLFC Series measures the mass flow rate of gases in 4 ranges from 0-250 NmLPM to 0-500 NmLPM as range table.
|
 |
MTMF Series
Thermal Mass Flow Meters
The MTMF Series comes with or without an LCD display, and all models come with linear 0-5 V DC and 4-20 mA output. The MTMF Series measures the mass flow rate of gases in 4 ranges from 0-750 NLPM to 0-1500 NLPM as range table.
|
 |
MTW-100
Turbine Wheel Flow Meter
• Available in five flow rate ranges - capable of measuring flows from 0.2 to 20 L/min (5.2 GPM)
• Cast stainless steel construction insures compatibility with a wide range of fluids for a very economical price.
• Highly accurate - all MTW series flow meters provide ± 3% full scale linearity
• Flow switch functionality - easy access filed adjustable relay to provide a single flow alarm contact closure available as an option.
• Compact size - ideally suited for use in constrained spaces.
|
 |
TM44
Turbine Wheel Flow Meter
Malema's TM44 series turbine flow meter is used in precise measurement of clean fluid flow. The TM44 can be supplied as a basic sensor with a pulse output or a 4-20mA output. Alternatively, a number of electronic units are available to provide batch control, totalization and a display of instantaneous flow rate.
The standard TM44 turbine flow meter is resistant to most severe process fluids including acids, alkali, solvents, water, CIP fluids, oil, minerals, petrochemical products, cryogenic liquids, and other liquids.
|
 |
VF-2000
Vortex Flow Meter
Vortex Flow Sensor for Water
The VF-2000 flow sensor body and shedder bar (vortex generator) are molded as one component. Sensor body is made of PPS (Polypylene Sulphide) and is designed to eliminate deposits. A combination of straight flow path and shedder bar gives a lower pressure loss compared with other types of Polypylene Sulphide flowmeters.
|
 |
VF-2200
Vortex Flow Meter
Vortex Flow Sensor for Ultra Pure Water
The VF-2200 Flow Sensor is an improved version of the well-received VF-2000 and has a wider flow range than VF-2000. The VF-2200 Flow Sensor is a cost-effective instrument for the measurement of liquid flow.
A simple and compact design makes the VF-2200 a good choice for the measurement of water, pure water, and cooling water. Current output model, Pulse output model, and Display model with current / alarm outputs are available. Fitting is selectable from various types according to use.
|
(Back to the Top)
|
